Customer
Shopping Cart

TetherTools Relay Camera Coupler for Canon Cameras with LP-E12 Battery

Manufacturer:
Tether Tools
Our Part Number:
TTO1153
Manufacturer Part No:
CRCE12
Backorder
Ship Time: Please LiveChat or Email For Time
Quick Overview
- Works in tandem with the Case Relay Camera Power System
- Camera powered continually with an external 5V USB battery pack or wall power
$34.99
TetherTools Relay Camera Coupler for Canon Cameras with LP-E12 Battery TetherTools Relay Camera Coupler for Canon Cameras with LP-E12 Battery TetherTools Relay Camera Coupler for Canon Cameras with LP-E12 Battery
TetherTools Relay Camera Coupler for Canon Cameras with LP-E12 Battery
The Relay Camera Coupler combined with the Case Relay Camera Power System provides constant, uninterruptable power for your camera and is perfect for time-lapse photography, photo booths, video production and power-hungry LiveView shooting or any long day on the set. Need more power? Hot swap in another power bank and continue shooting while never losing power to your camera.

How Does it Work?
Simply insert the Relay Camera Coupler directly into the camera battery port, attach it to the Case Relay CPS and power your camera with the included Rock Solid External Battery Pack or an AC power source using an USB to AC wall adapter or use the ONsite D-Tap Battery with V-Mount. Because Case Relay also has its own secondary internal 1200 mAh battery, if your external battery runs low you can easily hot swap the external battery and not lose power to the camera.
  • Insert Relay Camera Coupler into camera battery cavity
  • Completely close battery door allowing coupler cable to exit through the rubber trapdoor
  • Battery door must be completely closed for the Case Relay Camera Power System to properly function

Relay Camera Coupler & Relay CPS Benefits:
  • More cost effective than purchasing multiple proprietary camera batteries
  • Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
  • Never need to charge camera batteries again. And never run out power.
  • Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
  • A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.
Relay Coupler
Relay Coupler is simply an insert for your camera battery cavity that enables powering the camera via Case Relay Camera Power System. The coupler does not contain a battery or hold a charge.
Length
Coupler cable is 10" (25.4cm) – Coupler cable with Relay cable is 50" (127cm)
Compatibility
Canon Battery LP-E12
Canon EOS M, EOS M10, EOS M100, EOS M50, EOS Kiss M

CA Proposition 65

Attention to all California residents, Proposition 65 or officially known as, the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more than 850 chemicals. August 2016, OEHHA adopted new regulations, to go into effect on August 30, 2018, which changes the information that is required in or on Proposition 65 warnings.

We want you to know and be aware of our product safety and Midwest Photo is taking all of the necessary steps to comply with the applicable safety and health requirements made by this Proposition 65.

WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

This disclaimer can be found on the product pages on our website under the Additional Information tab which appears below the product description. It is listed on all product pages to ensure that our customer is aware of the warnings put out by our suppliers so you can know the precautions before purchasing. 

Additional Information about Proposition 65

For background on the new Proposition 65 warnings, see https://www.p65warnings.ca.gov/new-proposition-65-warnings.

Proposition 65 and its regulations are posted at https://oehha.ca.gov/proposition-65/law/proposition-65-law-and-regulations.

To give Midwest Photo any notices of an alleged violation of the California Health and Safety Code Section 25249.5 or 25249.6, you must send us a notice at mpex@mpex.com.