Customer
Shopping Cart

Photogenic PLR1250DR

Manufacturer:
Photogenic
Our Part Number:
PHG1176
Manufacturer Part No:
958446
Backorder
Ship Time: Please LiveChat or Email For Time
Quick Overview
- Fast 1/1300 sec. flash duration
- PocketWizard™ receiver
- Digital display of flash and modeling power settings
- 500Ws
- 1.5 second recycle from full power
$835.95
Photogenic PLR1250DR Photogenic PLR1250DR
Photogenic PLR1250DR
PowerLight® monolights are built to meet the everyday demands of photo professionals. Their job is a lot like yours: to provide exact and repeatable results in demanding lighting situations, day in and day out.

The PLR1250DR has a 6 f-stop flash output range from 16 to 500Ws. The unit delivers accurate, repeatable power to the flash tube every flash, for consistent exposures. At full power it has a short 1/1300 sec. flash duration. Tight control of the flash output is accomplished through a digital display that allows for precise adjustments in 1/10 or 1/2 f-stop increments. Just like the flash, the bright 250W modeling lamp can be controlled to any output level you need - full, proportional, manual or off. The flash tube is user replaceable.

You can throw away your sync cord - the PLR1250DR has a built-in PocketWizard™ receiver. Any PocketWizard™ transmitter you use will trigger the light from a distance up to 300 feet. Plus, there's no antenna to break off (it's in the handle), and there are no batteries to worry about (the power comes from the light).

When you purchase a PowerLight, you gain the creative freedom that comes from having dozens of compatible light modifiers to choose from: soft boxes, umbrellas and the entire Quick-Change line, including those legendary Photogenic reflectors.

Professionals trust Photogenic PowerLights for rugged build, consistent output, and reliable results.

Features:
  • Fast 1/1300 sec. flash duration
  • PocketWizard™ receiver
  • Digital display of flash and modeling power settings
  • 500Ws
  • 1.5 second recycle from full power
  • 6 f-stop flash power range: 500~16Ws
  • Repeatable flash output to ±0.05 f-stop
  • GN 365
  • 250W modeling lamp
  • Flash and modeling output adjustments in 1/10 or 1/2 f-stop increments
  • Proportional, full on/off, or manual modeling lamp settings
  • Flash OK light
  • Ready light
  • Auto power discharge (flash dump)
  • Photo slave
  • Safe, low 5-volt sync voltage
  • Heavy-duty 1/4" sync socket
  • Test-fire button
  • Surge protection
  • Internal thermal protection
  • Extruded aluminum housing
  • Works with Quick-Change™light shaping accessories
Flash Power
16 to 500 watt-seconds
Guide Number (ISO100@10ft.)
365 w/PL7R reflector; 110 w/no reflector
Flash Duration
1/1300 second at full power; 1/640 second at 1/32 power
Recycle Time
1.5 sec. at full power; 0.5 sec. at 1/32 power
Power Control
Range: Full to 1/32 power (6 f-stops); 0.1 f-stop resolution
Modeling Light Power
250 watt Quartz, ESS
Modeling Light Control
Range: Full to 1/32 power (6 f-stops); 0.1 f-stop resolution
Triggering
Sync jack (5 volts); Push-to-test button; Built-in photo slave; Radio
Sync Voltage
5V
Main Supply
105 - 125 Vac, 60 Hz, 10 amps
Consumption
0.2 amps idling, 15 amps charging
Voltage Stabilization
± 0.05 f-stop
Fuse
3AG type 15 amp, SLO-BLO
Housing
Extruded aluminum
Weight
5 lbs. 8 oz.
Dimensions (housing only)
4.5" x 4.5" x 6.75"

CA Proposition 65

Attention to all California residents, Proposition 65 or officially known as, the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more than 850 chemicals. August 2016, OEHHA adopted new regulations, to go into effect on August 30, 2018, which changes the information that is required in or on Proposition 65 warnings.

We want you to know and be aware of our product safety and Midwest Photo is taking all of the necessary steps to comply with the applicable safety and health requirements made by this Proposition 65.

WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

This disclaimer can be found on the product pages on our website under the Additional Information tab which appears below the product description. It is listed on all product pages to ensure that our customer is aware of the warnings put out by our suppliers so you can know the precautions before purchasing. 

Additional Information about Proposition 65

For background on the new Proposition 65 warnings, see https://www.p65warnings.ca.gov/new-proposition-65-warnings.

Proposition 65 and its regulations are posted at https://oehha.ca.gov/proposition-65/law/proposition-65-law-and-regulations.

To give Midwest Photo any notices of an alleged violation of the California Health and Safety Code Section 25249.5 or 25249.6, you must send us a notice at mpex@mpex.com.