Customer
Shopping Cart

DJI LiDAR Range Finder (RS)

Manufacturer:
DJI
Our Part Number:
HLI1302
Manufacturer Part No:
DJI LIDAR RANGE FIND
Backorder
Ship Time: Please LiveChat or Email For Time
Quick Overview
- 14m range
- Built-in camera
- 30mm-equivalent focal length, 70° FOV
- Enables autofocus on manual lenses
- Enhances tracking.
$659.00
DJI LiDAR Range Finder (RS) DJI LiDAR Range Finder (RS) DJI LiDAR Range Finder (RS) DJI LiDAR Range Finder (RS) DJI LiDAR Range Finder (RS)
DJI LiDAR Range Finder (RS)

The LiDAR focusing system makes focusing easier for hand-held shooting, without relying on the surface texture of the subject. This is especially useful in low-light environments and results in exceptional focusing capabilities.

The new LiDAR Range Finder (RS) can project 43,200 ranging points, detect within a 14-meter range, [1] and has a built-in camera with an equivalent focal length of 30 mm and a wide FOV of 70°, which can handle the focusing needs of most scenarios. Pairing with the new Focus Motor (2022) also makes autofocus on manual lenses possible after calibration.

With the LiDAR Range Finder (RS), RS 3 Pro supports ActiveTrack Pro, delivering better subject identification and tracking performance.

1. Tested in an environment without strong light. In normal shooting environments, the detection distance of human subjects is 7 meters.

Compatibility
DJI RS 3 Pro
Accessory Port
Cold Shoe
1/4"-20 Mounting Hole
USB-C Port
USB-C Power/CVBS/CAN Data Port
Image Sensor
Resolution: 448×298 on the touchscreen
FOV: 57.4° (horizontal), 44.6° (vertical), 70.1° (diagonal)
Focal Length: 30mm equivalent
ToF sensor
Resolution: 240×180
Sensing Range: 0.5-14 m
Distance Error: 1%
Machine Learning
Can recognize up to five targets at the same time, and choose one to follow.
Identification Distance: 9 m
Electrical Properties
Power Consumption: 6.8 W
Input: 7 to 16 V
Operating Temperature
-20deg; to 45deg;C (-4deg; to 113deg; F)
Mechanical Properties
Dimensions: 66×57×24 mm (L×W×H)
Weight: Approx. 130 g
Mounting Plate Height: 30 mm
Lenses that Do Not Needs Calibration
DZOFILM Vespid Cyber 35/50/75 mm

Below are the items included with this product



  1. LiDAR Range Finder (RS)
  2. Multi-Camera Control Cable (USB-C, 30 cm)
  3. LiDAR Control Cable (USB-C, 30 cm)

CA Proposition 65

Attention to all California residents, Proposition 65 or officially known as, the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more than 850 chemicals. August 2016, OEHHA adopted new regulations, to go into effect on August 30, 2018, which changes the information that is required in or on Proposition 65 warnings.

We want you to know and be aware of our product safety and Midwest Photo is taking all of the necessary steps to comply with the applicable safety and health requirements made by this Proposition 65.

WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

This disclaimer can be found on the product pages on our website under the Additional Information tab which appears below the product description. It is listed on all product pages to ensure that our customer is aware of the warnings put out by our suppliers so you can know the precautions before purchasing. 

Additional Information about Proposition 65

For background on the new Proposition 65 warnings, see https://www.p65warnings.ca.gov/new-proposition-65-warnings.

Proposition 65 and its regulations are posted at https://oehha.ca.gov/proposition-65/law/proposition-65-law-and-regulations.

To give Midwest Photo any notices of an alleged violation of the California Health and Safety Code Section 25249.5 or 25249.6, you must send us a notice at mpex@mpex.com.