Customer
Shopping Cart

Benro A373F Aluminum Video Tripod & S8 Head

Manufacturer:
Benro
Our Part Number:
BEN1251
Manufacturer Part No:
A373FBS8
Backorder
Ship Time: Please LiveChat or Email For Time
Quick Overview
- Max height of 63.8 in
- Supports up to 17.6 lb
- 4-step Counterbalance
- 75mm Flat base head with 3/8" thread
- Independent Locks
$459.00
Benro A373F Aluminum Video Tripod & S8 Head Benro A373F Aluminum Video Tripod & S8 Head Benro A373F Aluminum Video Tripod & S8 Head
Benro A373F Aluminum Video Tripod & S8 Head
The Benro S8 video tripod kits are jam packed with features that you actually need. Built for HDSLR cameras with rigs and long lenses or the latest video cameras, the S8 kits support up to 17.6 lb. Equipped with a 75mm flat base with a 3/8" thread, the S8 becomes a versatile creative tool allowing you remove the 75mm half ball adapter to mount the head separately on sliders, jibs, or monopods.

Other features include: pan & tilt lock, pan & tilt drag, 4-step counterbalance, illuminated bubble level and two 3/8" accessory mounts for attaching monitor arms or audio recorders directly to the head. This allows you to attach accessories without needing a cage or rig to do so.

Available in both Aluminum Alloy and Carbon Fiber, each S8 Video Tripod Kit is based on an eighth-generation design of single leg tubes and flip lever leg lock mechanisms. The tripod itself was made in combination with strategically select cast and machined aluminum and magnesium alloy components. Multi-angle leg locks allow each leg to be positioned independently for quick setup and uneven terrain. The rubber feet can be replaced with a set of stainless-steel spiked feet, which are included. For additional stability there is a weight hook at the bottom of the center column for hanging a camera bag or other weight. Max height = 63.8 in Closed length = 31.5 in

Features:

4-step Counterbalance
Counterbalance will help you counter the weight of your rig or heavy lens. Each step provides a different amount of counterbalance: 0 lb. (0 Kg), 5.5 lb. (2.5Kg), 11.0 lb. (5.0Kg), 17.6 lb. (8.0Kg)

75mm Flat base head with 3/8" thread
The S8 is equipped with a flat base with a 3/8" thread, allowing you to mount the head separately on sliders, jibs, monopods or half ball adapters. The S8 also uses a 504PL compatible QR6 plate.

Independent Locks
Both the pan lock and tilt lock can be turned on or off independently and are located on the operator side of the head for easy control. Tilt range for the S8 is +90o/-75o

Continuous Pan Drag
Dial in the perfect amount of tension necessary with the variable pan drag.

Adjustable Leg Angles
For an extra measure of flexibility, Benro tripod legs can be independently locked into place at three different angles to enable shooting in cramped quarters, on irregular surface areas, or at ground level

Flip leg locks
Tripod height can easily be set by a flip of the quick lock leg levers, which combined with anti-rotation legs enable fast and fumble-free set-up

Choice of Aluminum Alloy or Carbon Fiber
Choose between the sturdy and affordable Aluminum Alloy legs or the lightweight and travel-friendly Carbon Fiber legs

Carrying case included
Heavy Duty Case and Strap included for handy transport and protection of the tripod and head

Stainless Steel Spiked feet
Easily swap out the screw-in rubber feet for the stainless steel spiked feet to handle virtually any surface
Maximum Load
17.6 lb (8 kg)
Max Height (24° Leg Angle) w/Column Extended
63.8 in (162.1 cm)

Folded Length
31.5 in (80 cm)
Number of Leg Sections
3
Leg Lock
Type Flip Lock
Independent Leg Spread
Yes - with 3 stops
Tilt Range
+90 / -75 (Stepped 0-3 Fluid Cartridge Balance)
Drag Control
Lock
Panning Range
360°
Separate Panning Lock
Yes
Quick Release (QR) Plate
Slide-In Video (QR13) 1/4-20 & 3/8
Head Mount Thread Size
3/8-16 Leveling
Weight
11 lb (5 kg)
Warranty
5 = 3 years at purchase + 2 years after online registration

Below are the items included with this product



  1. Video Tripod
  2. Video Head
  3. QR Plate QR13
  4. Pan Bar Handle BS04
  5. Deluxe Carry Case
  6. Strap
  7. Spike Feet
  8. Tools

CA Proposition 65

Attention to all California residents, Proposition 65 or officially known as, the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more than 850 chemicals. August 2016, OEHHA adopted new regulations, to go into effect on August 30, 2018, which changes the information that is required in or on Proposition 65 warnings.

We want you to know and be aware of our product safety and Midwest Photo is taking all of the necessary steps to comply with the applicable safety and health requirements made by this Proposition 65.

WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

This disclaimer can be found on the product pages on our website under the Additional Information tab which appears below the product description. It is listed on all product pages to ensure that our customer is aware of the warnings put out by our suppliers so you can know the precautions before purchasing. 

Additional Information about Proposition 65

For background on the new Proposition 65 warnings, see https://www.p65warnings.ca.gov/new-proposition-65-warnings.

Proposition 65 and its regulations are posted at https://oehha.ca.gov/proposition-65/law/proposition-65-law-and-regulations.

To give Midwest Photo any notices of an alleged violation of the California Health and Safety Code Section 25249.5 or 25249.6, you must send us a notice at mpex@mpex.com.