Skylab XL PRO+ USB-C Female to USB-A 3.0 Extension Cable 9.5m/31ft
The Pro+ Collection

Features:

Tight Right Angle design to ensure a stable tether connection
Uses our new hybrid-optic technology
Highspeed with even faster transfer speeds
300lb rated crush-proof metal housing
IPX4 weather sealed
Power bridge chipset allows for an outstanding, stable 62ft connection
Slimmer, stronger soldered connectors
Extra-long lengths to go further distances without needing to use additional cables, extensions or power points.
No power injection points (No need!)
60-day cable failure guarantee

To create a Power Bridge for 62ft tethering you must follow the below steps;

1) Computer-end must be plugged in first
2) Then plug in the ANGLED USB-C into the camera and power camera on
3) Connect the USB-C straight end from the camera cable into the computer's cable USB-C female port. Connecting the two cables together.

If this order of steps is not followed, you will not properly connect at 62ft. If you power the camera down or change the camera batteries, you need to start at Step 1 and go in order of the directions to reconnect.

Compatible with but not limited to any camera using a USB-C port including, but not limited to;

SONY A7R4
SONY A1
SONY A7R III
NIKON Z6
NIKON Z7
LUMIX S1
LUMIX S1R
PHASE ONE IQ4
NIKON D810
NIKON D850
CANON 5DSR
CANON MK4 *must run the latest Canon MK4 firmware from Canon.com
CANON R5 *must use Canon firmware 1.4.0 or higher*
FUJI GFX 100**

Area 51 Skylab XL PRO+ USB-C Female to USB-A 3.0 9.5m/31ft Extension Cable