San Clemente Pro+ USB-C to USB 3.0 A Female Extension Tether Cable 4.5m/15ft
The Pro+ Collection

Features:

Convert your USB A Type to USB-C instead of using dongles.
Intended to boost and regenerate the data signals, ensuring that full superspeeds can be maintained at much longer lengths.
Performs seamlessly with all compatible Area51 Tether Co. cables without the need for any additional power supply when using a late 2016 Mac or newer computer model with USB-C.
Tight Right Angle design to ensure a stable tether connection
Uses our new hybrid-optic technology
Highspeed with even faster transfer speeds
300lb rated crush-proof metal housing
IPX4 weather sealed
Power bridge chipset allows for an outstanding, stable 62ft connection
Slimmer, stronger soldered connectors
Extra-long lengths to go further distances without needing to use additional cables, extensions or power points.
No power injection points (No need!)

Commonly paired with
Aurora+ USB Micro-B Right Angle to USB 3.0 Tether Cable 4.6m/15ft
O'Hare XL PRO+ USB-C Right Angle to USB-A 3.0 Tether Cable 9.5m/31ft
O'Hare USB-C Right Angle to USB-A 3.0 Tether Cable 4.6m/15ft
Ventura USB-C to USB-A 3.0 Tether Cable 0.9m/3ft

To create a Power Bridge for 62ft tethering you must follow the below steps;

1) Computer-end must be plugged in first
2) Then plug in the ANGLED USB-C into the camera and power camera on
3) Connect the USB-C straight end from the camera cable into the computer's cable USB-C female port. Connecting the two cables together.

If this order of steps is not followed, you will not properly connect at 62ft. If you power the camera down or change the camera batteries, you need to start at Step 1 and go in order of the directions to reconnect.

We recommend running the latest camera manufacturer firmware and Capture One 22 latest build. We use M1 on 12.3 with C22.

Area 51 San Clemente Pro+ USB-C to USB 3.0 A Female 4.5m/15ft Tether Cable