Dolce Pro+ USB 3.0 A to USB 3.0 A Female Extension Tether Cable 4.6m/15ft
The Pro+ Collection

Features:

Intended to boost and regenerate data signals, ensuring full superspeeds be maintained at much longer lengths.
Backwards compatible with all previous USB A Type versions and any USB A Type equipped device.
Performs seamlessly with all compatible Area51 Tether Co. cables
Commonly paired with Aurora+ USB Micro-B Right Angle to USB 3.0 Tether Cable 4.6m/15ft
Highspeed with even faster transfer speeds
300lb rated crush-proof metal housing
IPX4 weather sealed
Allows for an outstanding, stable 62ft connection
Slimmer, stronger soldered connectors
Extra-long lengths to go further distances without needing to use additional cables, extensions or power points.
No power injection points (No need!)

To create a Power Bridge for 62ft tethering you must follow the below steps;

1) Computer-end must be plugged in first
2) Then plug in the ANGLED USB-C into the camera and power camera on
3) Connect the USB-C straight end from the camera cable into the computer's cable USB-C female port. Connecting the two cables together.

If this order of steps is not followed, you will not properly connect at 62ft. If you power the camera down or change the camera batteries, you need to start at Step 1 and go in order of the directions to reconnect.

We recommend running the latest camera manufacturer firmware and Capture One 22 latest build. We use M1 on 12.3 with C22.

Area 51 Dolce Pro+ USB 3.0 A to USB 3.0 A Female 4.6m/15f Extension Tether Cable