Customer
Shopping Cart

ProMaster Dovetail Macro Sliding Rail

Manufacturer:
PROMASTER
Our Part Number:
PRM3887
Manufacturer Part No:
1802
Backorder
Ship Time: Please LiveChat or Email For Time
Quick Overview
- Fits ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System
- Can be slid back and forth for best positioning
- Two dovetail clamps are connected to the base rail
$99.95
ProMaster Dovetail Macro Sliding Rail ProMaster Dovetail Macro Sliding Rail ProMaster Dovetail Macro Sliding Rail
ProMaster Dovetail Macro Sliding Rail

The ProMaster Dovetail Macro Sliding Rail fits ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products. The base of the rail attaches to a dovetail tripod head and can be slid back and forth for best positioning.

Two dovetail clamps are connected to the base rail. The lower clamp slides along the rail to adjust the position of your camera and lens. The upper clamp acts as a quick release receiver for your camera to quickly connect to the system. The upper clamp can be mounted in one of four positions, allowing your camera or lens to be mounted in a front-to-back or side-to-side motion.

Multiple scales are etched into the Macro Sliding Rail to aid in repeatable setups.

This kit also includes a ProMaster 70mm Quick Release Plate (1795) which incorporate two removable safety bolts to prevent it from accidentally sliding out of the clamp.

This system is excellent for macro photography in which small movements to the camera's distance relative to the subject can be used to change focus, composition, and reproduction ratio.

Rail Dimensions
41 mm high x 200 mm long x 73 mm wide.
Rail Weight
10 5/8 oz / 301 g
Length of Travel
6 3/8" / 162 mm
QR Plate Dimensions
70 mm long x 38 mm wide
QR Plate Weight
1 3/4 oz / 50 g

CA Proposition 65

Attention to all California residents, Proposition 65 or officially known as, the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more than 850 chemicals. August 2016, OEHHA adopted new regulations, to go into effect on August 30, 2018, which changes the information that is required in or on Proposition 65 warnings.

We want you to know and be aware of our product safety and Midwest Photo is taking all of the necessary steps to comply with the applicable safety and health requirements made by this Proposition 65.

WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

This disclaimer can be found on the product pages on our website under the Additional Information tab which appears below the product description. It is listed on all product pages to ensure that our customer is aware of the warnings put out by our suppliers so you can know the precautions before purchasing. 

Additional Information about Proposition 65

For background on the new Proposition 65 warnings, see https://www.p65warnings.ca.gov/new-proposition-65-warnings.

Proposition 65 and its regulations are posted at https://oehha.ca.gov/proposition-65/law/proposition-65-law-and-regulations.

To give Midwest Photo any notices of an alleged violation of the California Health and Safety Code Section 25249.5 or 25249.6, you must send us a notice at mpex@mpex.com.