Customer
Shopping Cart

Powerex MH-C9000PRO Professional Charger-Analyzer

Manufacturer:
Powerex
Our Part Number:
MAH1012
Manufacturer Part No:
MH-C9000P4PRO
In stock
Ship Time: Orders placed by 4pm ET will ship the same day. Weekends & Holidays Excluded.
Quick Overview
- 4 independent charging slots for AA/AAA NiMH Rechargeable Batteries
- 4 Modes of Operation
- Memory Settings
- Easy Setup
- Large backlit LCD display
$64.95
Powerex MH-C9000PRO Professional Charger-Analyzer Powerex MH-C9000PRO Professional Charger-Analyzer Powerex MH-C9000PRO Professional Charger-Analyzer Powerex MH-C9000PRO Professional Charger-Analyzer
Powerex MH-C9000PRO Professional Charger-Analyzer

The Powerex MH-C9000PRO Professional Charger-Analyzer is one of the most advanced chargers on the market and it is suitable for enthusiast, tech-savvy, and professionals. It charges 1 to 4 AA and AAA NiMH/NiCD rechargeable batteries via 4 independent charging slots in about 1 hour. The charger is compact sized, measuring at 4.25” x 4.25” x 2” (LWH) and has a large backlit LCD screen with an on and off option. There are ten selectable charge and discharge rates from 0.2A to 2.0A and 0.1A to 1.0A respectively. The charger has 4 Modes of operation: Charge, Break-In, Discharge, and Refresh & Analyze; which means that in addition to charging batteries, it can also analyze the health of the batteries. With the MH-C9000PRO Professional Charger-Analyzer, the “bad battery” guessing game is finally over!
* Batteries NOT included

Features:
  • 4 independent charging slots for AA/AAA NiMH Rechargeable Batteries
  • 4 Modes of Operation: Charge, Break-In, Discharge, and Refresh & Analyze
  • Memory Settings: Remembers the last settings that were used
  • Easy Setup: Set settings for 1 slot and apply same settings to all slots
  • Large backlit LCD display with On/Off option
  • Displays Capacity, Voltage, Time, and Rate
  • Optional car adapter (sold separately)

4 Operational Modes

CHARGE MODE

Charging current adjustable from 0.2A to 2.0A in 0.1A increments.
Useful when battery needs to be recharged without determining the capacity of the battery. It should be used on batteries known to be in good condition and have been in continuous use.

BREAK-IN MODE
Applies a 16-hour 0.1C charge (0.1 times the capacity of the battery), rest for one hour, followed by a 0.2C discharge, rest again, and finally a 16-hour 0.1C recharge again.

This process is also known as “Forming Charge.” Also recommended with batteries that cannot be rescued by the Refresh & Analyze mode.

The process follows the IEC standard for determining battery capacity.

DISCHARGE MODE
Discharging current adjustable from 0.1A to 1.0A in 0.1A increments.

Useful for analyzing the amount of charge stored in the battery. Battery not recharged at the end of the cycle.

REFRESH & ANALYZE MODE
First recharges the battery, rest for two hours, discharges, rest, then recharges again. Charging and discharging rates are programmable.

Reports the discharge capacity at the end of the cycle.

Useful when the battery capacity needs to be determined. Also useful for battery with degraded performance.

Below are the items included with this product



  1. MH-C9000PRO Professional Charger-Analyzer
  2. Compact 100-240V 50/60Hz Power Adapter

CA Proposition 65

Attention to all California residents, Proposition 65 or officially known as, the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more than 850 chemicals. August 2016, OEHHA adopted new regulations, to go into effect on August 30, 2018, which changes the information that is required in or on Proposition 65 warnings.

We want you to know and be aware of our product safety and Midwest Photo is taking all of the necessary steps to comply with the applicable safety and health requirements made by this Proposition 65.

WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

This disclaimer can be found on the product pages on our website under the Additional Information tab which appears below the product description. It is listed on all product pages to ensure that our customer is aware of the warnings put out by our suppliers so you can know the precautions before purchasing. 

Additional Information about Proposition 65

For background on the new Proposition 65 warnings, see https://www.p65warnings.ca.gov/new-proposition-65-warnings.

Proposition 65 and its regulations are posted at https://oehha.ca.gov/proposition-65/law/proposition-65-law-and-regulations.

To give Midwest Photo any notices of an alleged violation of the California Health and Safety Code Section 25249.5 or 25249.6, you must send us a notice at mpex@mpex.com.