Customer
Shopping Cart

Godox SK300II-V Studio Flash

Manufacturer:
Godox
Our Part Number:
DOX1825
Manufacturer Part No:
SK300IIV
Backorder
Ship Time: Please LiveChat or Email For Time
Quick Overview
- Built-in Godox 2.4G wireless X system
- Precise output displayed on LCD panel
- Use optional X1, XT16 or FT-16 trigger to control the flash
- Compact and lightweight body with Bowens mount
- 10W modeling lamp adjusts in 5% to 100% power levels
$139.00
Godox SK300II-V Studio Flash Godox SK300II-V Studio Flash Godox SK300II-V Studio Flash Godox SK300II-V Studio Flash Godox SK300II-V Studio Flash
Godox SK300II-V Studio Flash
SKIIV series, updated with the new brighter LED modeling light, is a cost-effective compact strobe for e-commerce product shooting, portrait and lifestyle photography, easy to set up in small and medium studios.

Features:
  • Built-in Godox 2.4G wireless X system
  • Precise output displayed on LCD panel, 40 steps from 1/16 to 1/1 (or 6.0 to 10.0)
  • Use optional X1, XT16 or FT-16 trigger to control the flash power ratio, modeling lamp and buzzer, as well as flash triggering
  • Compact and lightweight body with Bowens mount to add almost any studio light shapers
  • 10W modeling lamp adjusts in 5% to 100% power levels
  • Outstanding output stability, no more than 2% shifts when under the same output
  • Anti-preflash function enables synchronization with cameras that have a one-preflash firing system
  • Auto memory and recovery of adjusted panel settings
The SK300II-V studio flash is a simple but effective unit in which we can adjust the power between 1/16 to 1/1. In addition, the SK300 guarantees a short charging time between flashes, an LED modeling light, the brightness of which can be set to proportional to mimic the effects of the flash power setting to pre-visualize the photo, or it can be adjusted manually or simply turned off. A built-in System X receiver rounds out the flash's tremendous functionality.

Functionality
The Godox SK series features a flash energy adjustment range of 4 aperture stops (1/1 - 1/16, accurate to 0.1 EV). Charging time to full flash energy less than 2 seconds. At minimum power, it achieves a very short flash duration of only 1/2000s (t=0.1), allowing casual shooting during a session. The color temperature of the flash is 5600K and can vary between ±200K depending on the flash energy setting.

Control
The built-in X System receiver allows you to remotely trigger the flash, control the energy and change the mode. In addition, the Godox SK series is equipped with a USB connector that allows you to connect XT16, FT-16 or X1 System receivers. It is also possible to use a 3.5mm jack socket and connect the flash to other brands of triggers.

Operation
The rear panel of the flash is simple, clear and functional. The LCD screen showing the lamp settings is easy to read even from a large angle. Next to it is located a handy knob for adjusting flash power, changing the radio communication channel and lamp group. Located below the LCD screen, a series of five buttons gives quick access to all lamp settings and functions. The LED modeling light can operate independently of the flash power (brightness can be set manually), or be coupled to the flash energy (proportional). In addition, it can be automatically turned off for the duration of the flash or illuminate continuously.

Mount
A wide range of light modifiers can be used with the lamp, such as reflectors, softboxes, snoots, beauty-dishes, and others are equipped with Bowens-type accessory mounts.
Max Power (Ws)
300WS
Guide Number
58 (mIS0100)
Operating Voltage
AC100V-120V~60Hz or AC200V-240V~50Hz
Power Output Control
OFF.6.0~10.0(1/16~1/1)
Modeling Lamp (W)
10W
Modeling Lamp Level
5%~100%
LED Modeling Lamp CCT
5700K±200K
Recycle Time
0.1-1,5S
Triggering Method
Sync cord, Optical triggering, Test button, Wireless control port
Flash Duration
1/2000-1/800S
Parameters output
5V/200mA (only for Godox receiver) from the USB port
Fuse
AC100V-120V~60Hz: 8A
Dimension
Flash diameterZ: 13.7cm
Height of flash with handle: 20.6cm
Weight
2kg

Below are the items included with this product



  1. Flash Head
  2. Power Cable
  3. Lamp Cover

CA Proposition 65

Attention to all California residents, Proposition 65 or officially known as, the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more than 850 chemicals. August 2016, OEHHA adopted new regulations, to go into effect on August 30, 2018, which changes the information that is required in or on Proposition 65 warnings.

We want you to know and be aware of our product safety and Midwest Photo is taking all of the necessary steps to comply with the applicable safety and health requirements made by this Proposition 65.

WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

This disclaimer can be found on the product pages on our website under the Additional Information tab which appears below the product description. It is listed on all product pages to ensure that our customer is aware of the warnings put out by our suppliers so you can know the precautions before purchasing. 

Additional Information about Proposition 65

For background on the new Proposition 65 warnings, see https://www.p65warnings.ca.gov/new-proposition-65-warnings.

Proposition 65 and its regulations are posted at https://oehha.ca.gov/proposition-65/law/proposition-65-law-and-regulations.

To give Midwest Photo any notices of an alleged violation of the California Health and Safety Code Section 25249.5 or 25249.6, you must send us a notice at mpex@mpex.com.