Compact ½" Condenser Microphone with Detachable Capsule (head)
The RODE NT6 is specifically designed for difficult mounting applications. Although clearly relevant to instrument miking, the new NT6 is extremely well suited to any situation where a small 'unobtrusive' but powerful microphone system is required.
The ½"(externally biased) gold sputtered capsule is designed to attach to a custom made, multi-position swivel mount allowing it to be independently positioned with ease. The capsule is connected to the remote pre-amplifier (body) by a custom 3m Kevlar fibre reinforced cable.
The surface-mount pre-amplifier circuit also incorporates a two position variable pad: 0 dB and -10 dB attenuation, and a 2-position variable high-pass filter that enables you to step from a flat response to 80Hz high pass filter; both conveniently located away from the capsule, providing additional control without the need to move the capsule once in position.
Features:
Cardioid Pattern
Frequency Response
The RODE NT6 is specifically designed for difficult mounting applications. Although clearly relevant to instrument miking, the new NT6 is extremely well suited to any situation where a small 'unobtrusive' but powerful microphone system is required.
The ½"(externally biased) gold sputtered capsule is designed to attach to a custom made, multi-position swivel mount allowing it to be independently positioned with ease. The capsule is connected to the remote pre-amplifier (body) by a custom 3m Kevlar fibre reinforced cable.
The surface-mount pre-amplifier circuit also incorporates a two position variable pad: 0 dB and -10 dB attenuation, and a 2-position variable high-pass filter that enables you to step from a flat response to 80Hz high pass filter; both conveniently located away from the capsule, providing additional control without the need to move the capsule once in position.
Features:
- Externally biased condenser
- Gold sputtered ½" capsule
- Two position PAD - 0dB and -10dB
- Two position High-Pass Filter - flat and 80Hz
- Heavy-duty satin-nickel plated body
- Surface mount circuitry
- Low noise and full frequency response
Cardioid Pattern
Frequency Response
Power
P48 (48V), P24 (24V) phantom supply or 9V battery
Acoustic Principle
Pressure gradient
Directional Pattern
Cardioid
Frequency Range
20 Hz - 20 kHz
Output Impedance
200
Signal noise ratio
75 dB SPL (A - weighted per IEC651)
Equivalent noise
19 dB SPL (A - weighted per IEC651)
Maximum SPL
135dB SPL (@ 1kHz, 1% THD into 1KO load) (145dB with maximum PAD)
Sensitivity
-37 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) " 2 dB @ 1kHz
Weight
386gm
Dimensions
188.4mmH x 64mmW x 20mmD
Below are the items included with this product
- Custom swivel mount
- ZP1 zip pouch
- WS5 windshield
- Convenient two-axis swivel mount
- 3m Kevlar fibre reinforced cable
Included Items
NT6 Capsule head on swivel mount
Mic head, preamp, windshield and attachments
Be the first to review this product. Post your review below
