Compact ½" Cardioid Condenser Microphone
The NT55 utilises the ½" gold sputtered true condenser transducer used in the internationally renowned RODE NT5. The NT55 is a low-noise, balanced output microphone, exhibiting a wide dynamic range and full frequency response.
The NT55 circuit incorporates a three position variable PAD with 0dB, -10dB or 20dB attenuation, and a thereposition variable high-pass filter that enables you to step from a flat response to 75 or 150 Hz high pass filter.
The NT55 comes with two different condenser microphone heads to provide a wide variety of polar patterns. The NT55 is complemented with a diverse range of accessories to better facilitate positioning and attachment.
Features:
Cardioid Polar Pattern
Cardioid Frequency Response
Omni Polar Pattern
Omni Frequency Response
The NT55 utilises the ½" gold sputtered true condenser transducer used in the internationally renowned RODE NT5. The NT55 is a low-noise, balanced output microphone, exhibiting a wide dynamic range and full frequency response.
The NT55 circuit incorporates a three position variable PAD with 0dB, -10dB or 20dB attenuation, and a thereposition variable high-pass filter that enables you to step from a flat response to 75 or 150 Hz high pass filter.
The NT55 comes with two different condenser microphone heads to provide a wide variety of polar patterns. The NT55 is complemented with a diverse range of accessories to better facilitate positioning and attachment.
Features:
- Externally biased condenser
- Gold sputtered ½" capsule
- Three position PAD - 0dB, -10dB and -20dB
- Three position High-Pass Filter - flat, 75Hz and 150Hz
- Cardioid or Omni polar pattern using interchangeable capsules
- Heavy-duty satin-nickel plated body
- Surface mount circuitry
- Low noise
- Full frequency response
Cardioid Polar Pattern
Cardioid Frequency Response
Omni Polar Pattern
Omni Frequency Response
Power
P48 (48V) phantom supply
Acoustic Principle
Pressure gradient
Directional Pattern
Cardioid and Omni
Frequency Range
20 Hz - 20 kHz
Output Impedance
100
Signal noise ratio
79 dB SPL (A - weighted per IEC651)
Equivalent noise
15 dB SPL (A - weighted per IEC651)
Maximum SPL
136dB SPL (@ 1kHz, 1% THD into 1KO load)(146/156 with PAD)
Sensitivity
-38 dB re 1 Volt/Pascal (12 mV @ 94 dB SPL) " 1 dB @ 1kHz
Weight
110gm
Dimensions
145mmH x 20mmW x 20mmD
Below are the items included with this product
- 2x NT55 Mics
- 2x RM5 clip (stand mounts)
- 2x NT45-O omni capsule head
- 2x RC5 custom case
Be the first to review this product. Post your review below
