Compact ½" Cardioid Condenser Microphone
The NT5 matched pairs are a masterpiece of small-diaphragm cardioid-condenser microphone design.
Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.
Finished in durable satin nickel, the NT5 is intended for either single or stereo X/Y mic set-ups. The NT5 matched pairs comesupplied in a custom carry case with windshields and mounts.
Features:
Polar Pattern
Frequency Response
The NT5 matched pairs are a masterpiece of small-diaphragm cardioid-condenser microphone design.
Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.
Finished in durable satin nickel, the NT5 is intended for either single or stereo X/Y mic set-ups. The NT5 matched pairs comesupplied in a custom carry case with windshields and mounts.
Features:
- Externally biased condenser
- Gold sputtered ½" capsule
- Heavy-duty satin-nickel plated body
- Surface mount circuitry
- Low noise
- Full frequency response
Polar Pattern
Frequency Response
Power
P48 (48V), P24 (24V) phantom supply or 9V battery
Acoustic Principle
Pressure gradient
Directional Pattern
Cardioid
Frequency Range
20 Hz - 20 kHz
Output Impedance
100
Signal noise ratio
78 dB SPL (A - weighted per IEC651)
Equivalent noise
16 dB SPL (A - weighted per IEC651)
Maximum SPL
143dB SPL (@ 1kHz, 1% THD into 1KO load)
Sensitivity
-38 dB re 1 Volt/Pascal (12 mV @ 94 dB SPL) " 2 dB @ 1kHz
Weight
101gm
Dimensions
118mmH x 20mmW x 20mmD
Below are the items included with this product
- 2 x NT5 Mic
- 2 x RM5 stand mount
- RC5 case 2 x WS5 windshield
Be the first to review this product. Post your review below
