Features a low profile gap to help secure your shoe mount flash. 1/4 inch -20 female thread allows you to mount to many accessories. Features a small thumbscrew lock to hold your flash securely in place.
*note: If your flash has a plastic shoe, take care not to over tighten thumbs.
*note: If your flash has a plastic shoe, take care not to over tighten thumbs.
Weight (lbs.)
0.10
Height
0.5 inches
Width
1.125 inches
Depth
0.75 inches
Thread
1/4
Customer Reviews
Functional, but could be alot better.
Review by Hoydie17 -
(Posted on 12/15/11)
They're functional, but the fact that the threaded hole goes clean through the base is a problem. You can't screw the shoe mount all the way down on the stud, because it will ground out the flash by allowing the flash pin to rub against the brass stud. The flash as a result will not fire remotely.
I used some electrical tape to resolve this, but after a while, the tape wears down and has to be replaced.
From MPEX 12/15/2011: Try the LP716, variable cold shoe with a groove at the base so that the firing pin doesn't short out the flash.
| Value | |
| Quality | |
| Price |
You may also be interested in the following product(s)
LumoPro LP653 Studio Clamp w/ Double Stud
Price:
$19.99
|
LumoPro LP634 Umbrella Swivel Adapter
Price:
$21.99
|
LumoPro LP605 7ft. Compact Light Stand
Price:
$39.99
|
